EVO-ONE

0 Reviews

High Current All in One Remote Start & Integration Module

The EVO-ONE is a remote start and integration module in one. It offers a high current remote start along with a built-in EVO-ALL to control the vehicles transponder as well as convenience features. 

  • 3x on-board LEDs for simplified programming and diagnostics
  • 1x preloaded firmware for maximum compatibility
  • 1x Harness part bag
  • 2x 2-way datalink port for data-to-data (RS-232) communication with compatible external devices such as smartphones & GPS telematic units
  • 1x All EVO-ALL I/O for full fledge Data and Analog vehicle functions coverage
  • Self-Learning algorithm auto-detects vehicle during programming and adjusts accordingly

Overview

The EVO-ONE is the smallest high current remote start and integration module in one. The system offers a full remote start with a built-in integration module. This features all of the benefits of the EVO-ALL, including the ability to utilize the entire line up of EVO-ALL T-harnesses as well as being able a full high current remote start.

What that means is this can be installed on its own into nearly any vehicle with no extra parts. This will allow you to add the ability to OEM start (the ability to start your vehicle from your OEM key fob) to nearly every vehicle. The EVO-ONE also offers a full line of high current T-harnesses to help make your install faster and give it that OEM look.

THIS PRODUCT MUST BE SOLD, INSTALLED AND SUPPORTED BY A PROFESSIONAL

Specifications

Works With
Flash-Link Manager
RF Kits
Sensor Modules
Dcryptor
Telematic & GPS Modules
External Triggers
Advanced Features
Built-In Alarm System
Stand Alone Remote Starter
OEM Remote Monitoring
3X Lock Remote Starter
Remote Starters
Dcryptor
Push To Start Ignition
Immobilizer System
Door Locks
Trunk Open
Heated Seats
Rear Defrost
Hood Status
Tachometer
Foot-Brake Status
Gas Cap Release
OEM Remote Monitoring
Remote Start
Electronic Ignition
Factory Alarm
Dual Driver Presets
Parking Lights
Heated Mirrors
Door Status
Trunk Status
Hand-Brake Status
Retained Accessory Power
T-Harness
Unlock Drivers Door Only
Alarm Systems
Factory Alarm
Dual Driver Presets
Parking Lights
Hood Status
Gas Cap Release
OEM Remote Monitoring
Door Locks
Trunk Open
Door Status
Trunk Status
T-Harness
Unlock Drivers Door Only
Immobilizer Bypass
Dcryptor
Passkey 3+ Immobilizer
Passkey 3 Immobilizer
Passlock Immobilizer
GPS Systems
Tachometer
Foot-Brake Status
Specifications
5x High power Onboard relay
3x CAN-Bus controllers
3x General purpose controllers (J1850, LIN, Class 2, encrypted key etc.)
1x On-board relay (DPDT)
1x Analog controller 0-12VDC @ 20mV steps (Passlock, Parking lights, MUX)
10x Data I/O controllers
1x Dual zone shock sensor input
2x Datalink RS232 ports
In The Box
1x EVO-ONE control module (firmware preloaded)
1x Warning label
1x Hood Pin switch
1x 20 Pin general purpose harness
1x 4 Pin Fortin 2-way data-link harness
1x 6 Pin High Power Harness

Reviews

Overall Rating

Reviewed by 0 customers

Support

Tech Tips: Add Shock Sensor to EVO-ALL & EVO-ONE - Owner's Manual

Download