EVO-ALL

0 Reviews

Universal Integraion Module

The EVO-ALL is an integration module that connects to the remote start that allows it to talk to the vehicle to allow it to start. There are multiple T-harnesses available to make your installation faster and look more OEM.

  • 3x on-board LEDs for simplified programming and diagnostics
  • 1x preloaded firmware for maximum compatibility
  • 4-wire Fortin 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems
  • 20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems
  • Self-Learning algorithm auto-detects vehicle during programming and adjusts accordingly

Overview

The EVO-ALL is a remote start integration device that allows the remote start to communicate with the vehicle. The module will connect to the CAN BUS network of the vehicle where it communicates with the other computers in the vehicle and tells the it what the remote start wants the vehicle to do. Such as pressing the Lock button on the remote will tell the remote start to tell the EVO-ALL to tell the vehicle to lock the doors.

The EVO-ALL has multiple CAN controllers built-in so that it can talk to more than one CAN network in a vehicle if applicable. The EVO-ALL also comes pre-flashed for many vehicles, so there may be no need to plug the module into a computer and make adjustments. The module also is full high speed 2-way data to data that allows it to connect with a minimal amount of connections to the remote start system.
THIS PRODUCT MUST BE SOLD, INSTALLED AND SUPPORTED BY A PROFESSIONAL

Specifications

Works With
Flash-Link Manager
RF Kits
Sensor Modules
Dcryptor
Telematic & GPS Modules
External Triggers
Advanced Features
Built-In Alarm System
Stand Alone Remote Starter
OEM Remote Monitoring
3X Lock Remote Starter
Remote Starters
Dcryptor
Push To Start Ignition
Immobilizer System
Door Locks
Trunk Open
Heated Seats
Rear Defrost
Hood Status
Tachometer
Foot-Brake Status
Gas Cap Release
OEM Remote Monitoring
Remote Start
Electronic Ignition
Factory Alarm
Dual Driver Presets
Parking Lights
Heated Mirrors
Door Status
Trunk Status
Hand-Brake Status
Retained Accessory Power
T-Harness
Unlock Drivers Door Only
Alarm Systems
Factory Alarm
Dual Driver Presets
Parking Lights
Hood Status
Gas Cap Release
OEM Remote Monitoring
Door Locks
Trunk Open
Door Status
Trunk Status
T-Harness
Unlock Drivers Door Only
Immobilizer Bypass
Dcryptor
Passkey 3+ Immobilizer
Passkey 3 Immobilizer
Passlock Immobilizer
GPS Systems
Tachometer
Foot-Brake Status
Specifications
3x CAN-Bus controllers
3x General purpose controllers (J1850, Class 2, encrypted key etc.)
1x On-board Relay (SPDT)
1x On-board Relay (DPDT)
1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX)
1x TB control port for TB-series modules
13/16" x 2-1/16" x 3-1/4"
In The Box
1x EVO-ALL control module (firmware preloaded)
1x 44-page Installation and programming guide
1x 20-pin General purpose harness
1x 4-pin Fortin 2-way data-link harness
1x 5-pin CAN-Bus harness
1x 6-pin Relay harness

Reviews

Overall Rating

Reviewed by 0 customers

Support

Tech Tips: Add Shock Sensor to EVO-ALL & EVO-ONE - Owner's Manual

Download