ca5016
 

The Backstopper™ CA-5016 is a front and rear impact warning sensor system designed to aid the driver not only when backing up the vehicle but also when pulling forward. The system includes a colorful LED digital display with a four sensor direction indicator as well as an external plug-in style audible buzzer. (8) ultra-sonic sensors are also included with the system for front and back signaling as well as an on/off switch for the front sensors.

The crystal-clear colorful LED digital display comes with a four-sensor direction indicator which will also indicate when it is the front or the rear sensors detecting the obstruction. The external plug-in style buzzer will alert the driver to an obstruction with a three-stage audible warning and different alert tones for the front and back sensors

An on/off switch is included with the system for the front sensors to turn them on and off when needed. The system also has a foot-brake input that can be wired with the on/off switch. This means that when the front sensors are turned on, the driver will get a distance reading when the foot brake is applied making it very convenient when parking in a garage or cramped parking lot.

The sensors wide detection angle will alert the driver of any small children, pedestrians, animals or small unseen objects such as bicycles or parking poles in the front or the rear of the vehicle.

 
 
System Type:
Front & Reverse
Display Type:
Universal
Audible Buzzer:
Yes
Number of Sensors:
8 (4 Front & 4 Rear)
Sensor Cable Length:
FRONT CABLE: 13 Ft.
REAR CABLE: 8.5 Ft.
Display Cable Length:
19 Ft.
Hole Saw Diameter:
21 mm
Power Source:
12 Volt
 
   
  • Front and rear impact warning
  • Crystal-clear colorful LED digital display
  • Four-sensor direction indicator mode for front and rear sensors
  • Flexible bracket for easy installation of display
  • External plug-in style buzzer for audible warning
  • Three-stage audible obstruction warning signaling
  • Different alert tones for front and rear sensors
  • (8) ultra-sonic sensors with "quick disconnect" waterproof connectors
  • On/off switch included for front sensors
  • Foot brake input for front sensor activation
  • Sensors can be painted to match the color of the vehicle
  • Hole saw bit included for sensor installation
   
 
 

The CA-5016 system has a ultra-bright blue LED display with a 4-direction indicator mode to give the driver four separate distance read-outs for the sensors. There are eight separate sensors (Four front and four rear) that help to judge the distance to an object around the vehicle. The front sensors work with the vehicle's brake pedal while the rear sensors work with the standard reverse gear. A separate on/off switch is included with the kit to shut off the front sensors when the driver does not need to use them.

 
 
The sensors can be painted to match the color of the vehicle. This way the vehicle can still look clean and not appear as though any aftermarket equipment has been installed. A hole saw bit comes included with the system to help drill the exact size hole needed to fit the sensors into place.