4-Channel Commercial DVR System with Built-in Quad Processor and GPS

The CDR-525 is commercial black box DVR system that provides the absolute best in video surveillance. Just like the other models, it uses up to four cameras for video surveillance and also has the same amount of memory storage as it's sister CDR-520 model. The major difference is that this system also provides a GPS location and vehicle information with all recordings so the vehicle owner can see exactly where as well as when the recorded event took place.

  • Provides around-the-clock monitoring of the vehicle
  • Up to (4) cameras can record while ignition is on
  • Built-in processor allows viewing of all cameras at once on external monitor (not included)
  • Up to (4) 32GB SD cards
  • Lockable cover on SD cards
  • USB connection for backing up recording files and updating
  • Up to (8) triggers can activate system
  • Timer recording
  • Built-in G-sensor
  • Built-in GPS system to give location of recorded event
  • Motion sensing recording
  • Full function remote


The CDR-525 is our commercial Black Box type DVR system that supports up to four cameras for simultaneous recording around the vehicle. Just like the CDR-520, the CDR-525 simply turns on when the ignition system is powered up and activates all four cameras to start recording. The DVR system will continue to record as long as the ignition is on. It also has a series of trigger inputs that will allow the system to activate and start recording on designated camera inputs. The CDR-525 also comes included with a built-in GPS system to clock the location of the vehicle during the recorded event.

The CDR-525 uses up to four 32GB SD cards (128GB max) for recording storage making it the largest DVR system in our inventory in terms of memory capacity. When the ignition cycles on, the DVR system will power up all four cameras and will begin recording. When one SD card is full, the system will begin storing recordings onto the next one until all SD cards are full. The system has a cyclic recording feature so when all SD cards are full, the system will automatically begin re-writing over the oldest recorded file. The CDR-525 also supports a USB connection to allow recordings to be backed up onto a flash drive instead of leaving all the recordings stored on the SD card. The user can go into the system and select which recordings that want to be saved and back them up onto the USB device.

The CDR-525 gives you full control when it comes to customizing your recording options. Not only does it simply record on all four cameras when the ignition is on, but you can also set the system for timer recording as well. The user programs each individual video input to start recording any time of day on any day of the week. This is perfect for vehicles in high crime areas. The timer can also be set to record for any length of time the user designates whether it be ten minutes or three hours. The recording quality can also be programmed by the user as well. Each camera input can be programmed to record in a certain file type (AVI, FLM, MSV) and the recording time length can be set to allow the DVR system to record files to a certain time length. This will prevent the system from recording too large of files and make it easier to review when playing back the recordings. The frame rate can be adjusted between 30 FPS for NTSC and 25 FPS for PAL TV systems and the audio recording rate can also be adjusted from low to high quality. Brightness, contrast, hue and saturation san also be adjusted individually between each camera input. This way if you have a camera that is on the inside of the vehicle and the picture needs to be brighter to see inside, you can adjust the picture quality on that specific camera without affecting any of the other channels.

Other useful features of the CDR-525 are the built-in G-Sensor which forces the system to begin recording to an accident. When the G-Sensor is triggered, the recordings are automatically write protected and cannot be deleted over-written until the user manually deletes them from the system or backs them up onto the USB device. The G-Sensor sensitivity can be increased or decreased to allow the unit to start recording based on how high or low the G-forces are. The system also has motion sensing to allow automatic recording is any motion is detected on any of the cameras. A speed sensor input to clock the vehicles speed during the recorded events. With the speed sensor hooked up, the user can set the system to record based on constant speed and distance. The system also has an "Overspeed" setting which allows the system to start recording if the vehicle travels over a certain speed. Last the CDR-525 system has a series of alarm triggers which can trigger the system to activate and begin recording with the door trigger, turn signals and brake pedal.


Display Resolution
720 × 480
Video System
Video Inputs
(4) Aerial/RCA 1.0Vp-p Composite (75 Ohm load)
Video Outputs
(1) Aerial/RCA 1.0Vp-p Composite (75 Ohm load)
6½"(L) × 7"(W) × 1¾"(D)
Operating Temperature
-4°F - 158°F (-20°C - 70°C)
Power Source
DC 9V - 36V
Power Consumption
Active: 5W   Standby: 2mA
Audio In/Out
DVR Storage
SD Card - 4×32GB (128GB Max) / USB Disk (2TB)
Frame Rate
25 - 30 FPS
Motion Detection
Video Format
H.264 AVI/MP4
Image Format


Commercial DVR - Owner's Manual


Consumer DVR - Owner's Manual


Commercial DVR - Owner's Manual